D15™ Corporate Mask

Healing the nation with #Masks4All

An eco-friendly solution to the current global crisis

Locally-produced, environmentally-friendly and comfortable filter face masks

The Brits D15™ Corporate Filter Face Masks has been specifically-designed to slow the spread of COVID-19. The masks go above and beyond the DTIC guidelines of 75% holdout for particles above 5μm, utilising a purpose-built filter system that traps 90% of particles that may be carrying the disease. The mask system is comfortable and reusable, providing a cost-effective solution to flattening the curve.

The Reusable, Eco-Friendly Principle

Our masks consist of an envelope design into which the D15™ Filter is inserted. Together, these form a reusable mask which can be sterilised on a daily basis. The D15™ Filter can be reused up to 7 times, and the outer mask envelope up to 100 times. The D15™ Corporate Filter Face Masks are made from up to 80% recycled raw material, and are 100% recyclable.

Many of us have bought face masks that we have found to be uncomfortable and difficult to breathe in, and are more than likely not providing an adequate level of protection. Our D15™ Corporate Filter Face Masks are designed to provide unrivalled protection, comfort and wearability.

D15™ Corporate Mask Features & Benefits

D15™ Corporate Filter Face Mask SANAS Report

Modes of Transmission of the COVID-19 Virus

Respiratory infections can be transmitted through droplets of different sizes. When droplet particles are >5-10µm in diameter, they are referred to as respiratory droplets, and droplet nuclei when <5µm in diameter. According to current evidence, COVID-19 in the public domain is primarily transmitted through respiratory droplets. Droplet nuclei mainly occur in hospitals, where they have specialised masks. The primary mode of infection for the public is therefore respiratory droplets >5µm in size, which are generated by talking, coughing and sneezing.

A key to reducing the rate of infection is to disrupt this transport system for the virus by controlling respiratory droplets.

The filter system for masks that we have created is designed to do exactly that, trapping any particle 5µm and above. The mask (filter + envelope fabrics) actually traps many smaller particles as well, but the real holdout is targeted to be 90% for particles above 5µm.

Since the introduction of the D15™ Filter system, much work has been done to develop minimum requirements for COVID-19 protective masks for the public, resulting in the DTIC Recommended Guidelines for Fabric Face Masks.

D15™ Filter SANAS Performance Test Results

The D15™ Filter complies with the filter requirements as stated in the DTIC Fabric Face Mask Guidelines as published on 24 April 2020. The filter rating scores a 4 as per the industry requirements. Testing was performed against the Brits Nonwoven Private specifications, the DTIC Guidelines and the newly introduced rating system for filters and fabrics to be used for public face masks.

These guidelines set out a 75% minimum holdout for 5µm particles; see below for the rating scale and test results for the D15™ Filter.

Results for the D15™ Filter were as follows:

Brits Nonwoven D15™ Corporate Face Mask Packaging Specifications

* Dimensional tolerance is +-10%

D15™ Wear & Wash Care Instructions

Scan or Click the QR Codes Above for More Information

Product Gallery

D15™ Disclaimer

Scan or Click the QR Code Above for More Information

Healing the nation with #Masks4All

An eco-friendly solution to the current global crisis

Locally-produced, environmentally-friendly and comfortable filter face masks

The D15™ Corporate Filter Face Masks has been specifically-designed to slow the spread of COVID-19. The masks go above and beyond the DTIC guidelines of 75% holdout for particles above 5μm, utilising a purpose-built filter system that traps 90% of particles that may be carrying the disease. The mask system is comfortable and reusable, providing a cost-effective solution to flattening the curve.

The Reusable, Eco-Friendly Principle

Our masks consist of an envelope design into which the D15™ Filter is inserted. Together, these form a reusable mask which can be sterilised on a daily basis. The D15™ Filter can be reused up to 7 times, and the outer mask envelope up to 100 times. The D15™ Corporate Filter Face Masks are made from up to 80% recycled raw material, and are 100% recyclable.

Many of us have bought face masks that we have found to be uncomfortable and difficult to breathe in, and are more than likely not providing an adequate level of protection. Our D15™ Corporate Filter Face Masks are designed to provide unrivalled protection, comfort and wearability.

D15™ Corporate Mask Features & Benefits

D15™ Corporate Filter Face Mask SANAS Report

Modes of Transmission of the COVID-19 Virus

Respiratory infections can be transmitted through droplets of different sizes. When droplet particles are >5-10µm in diameter, they are referred to as respiratory droplets, and droplet nuclei when <5µm in diameter. According to current evidence, COVID-19 in the public domain is primarily transmitted through respiratory droplets. Droplet nuclei mainly occur in hospitals, where they have specialised masks. The primary mode of infection for the public is therefore respiratory droplets >5µm in size, which are generated by talking, coughing and sneezing.

A key to reducing the rate of infection is to disrupt this transport system for the virus by controlling respiratory droplets.

The filter system for masks that we have created is designed to do exactly that, trapping any particle 5µm and above. The mask (filter + envelope fabrics) actually traps many smaller particles as well, but the real holdout is targeted to be 90% for particles above 5µm.

Since the introduction of the D15™ Filter system, much work has been done to develop minimum requirements for COVID-19 protective masks for the public, resulting in the DTIC Recommended Guidelines for Fabric Face Masks.

D15™ Filter SANAS Performance Test Results

The D15™ Filter complies with the filter requirements as stated in the DTIC Fabric Face Mask Guidelines as published on 24 April 2020. The filter rating scores a 4 as per the industry requirements. Testing was performed against the Brits Nonwoven Private specifications, the DTIC Guidelines and the newly introduced rating system for filters and fabrics to be used for public face masks.

These guidelines set out a 75% minimum holdout for 5µm particles; see below for the rating scale and test results for the D15™ Filter.

Click on the table to view larger size

Results for the D15™ Filter were as follows:

Click on the table to view larger size

Brits Nonwoven D15™ Corporate Face Mask Packaging Specifications

Click on the table to view larger size

* Dimensional tolerance is +-10%

D15™ Wear & Wash Care Instructions

Scan or Click the QR Codes Above for More Information

Product Gallery

D15™ Disclaimer

Scan or Click the QR Code Above for More Information